Functions Of The Remote Control - Klarstein 10031386 Mode D'emploi

Functions of the Remote Control

Importants Hints on Remote Control
• Before first time use of the remote controller, install the batteries and ensure the "+"and "-" poles are cor-
rectly positioned.
• Ensure the remote controller is pointed to the signal receiving window, and that there is no obstruction in
between and the distance is 8m at the maximum.
• Do not let the remote controller drop or fling it at will.
• Do not let any liquid in the remote controller.
• Do not expose the remote controller directly to the sunlight or excessive heat.
• If the remote controller does not function normally, remove the batteries for 30 second before reinstall
them. If that doesn't work, replace the batteries.
• When replacing the batteries, do not mix the new batteries with old ones or mix batteries of different types,
which could cause failure of the remote controller.
• If the remote controller is not to be used for a long period of time, remove the batteries first, lest the leakage
from them may damage the remote controller.
• Properly dispose the discarded batteries.
Note: This is a universal remote controller which provide all the function buttons. Please understand that some
of the buttons may not function, depending on the specific air conditioner you have purchased. (If a specific
function is not available on the air conditioner, pressing the corresponding button will simply have no respond.)
HEAT and ELE.H functions are not available for cool only models, thus these two buttons do not work corre-
spondingly.
Controls
Press this button to turn on/off the unit. This will clear the existing timer and SLEEP
1 ON/OFF
settings.
Press this button to set the temperature display to Fahrenheit, which is displayed by
default in Celsius. The "°C" will not be displayed on the LCD. Press this button again
to restore the temperature display to Celsius. Note: Temperature display in Fahrenheit
2 °C/°F
is not available for some models. When temperature is displayed in Fahrenheit on the
remote controller, it might be in Celsius on the unit, the function and operation of which
will not be affected.
Press this button, you can select the fan speed as follows: Low > Mid > High > Auto. Note:
3 SPEED
AUTO air speed is not available in FAN mode.
Press this button to turn on/off the display. This is for the convenience of users who are
4 DISPLAY
unconformable sleeping with the backlight on.
Press this button to set the temperature display on the remote controller to ambient
5 iFeel
temperature and press this button again to set it to preset temperature.
24