Publicité
The steering can be trimmed with the trim wheel.
That means: If your vehicle moves slightly to the left and not 100% straight, you can adjust that with the trimm wheel.
Upper scale
Lower scale
The bind button is for the binding process between radio an the car. For binding this button must be
pressed.
With this switch you can adjust the gas / reverse function mirorred.
You have the choice between „NOR and REV".
NOR means normal: If the switch is set to NOR, the gas/reverse function will work as described in point 3.
REV means reverse: If the switch is set to REV, the gas/reverse function is mirrored.
That means: Pull the trigger 1 x to activate the reverse function. The car will move backwards.
Press the Trigger (lever) once up to activate the brake. If you push the trigger up again, you activate
the gas function and the car starts.
With the trim wheel, the steering angle can be regulated. The trim wheel shows a span of 0-6 on.
If you turn the trim wheel to 0, the steering does not react because the steerring angel is not possible.
If you have turned the wheel to 6, you have the maximum steering angle.
With the trimm wheel you can increase or reduce the gas.
This setting is to made when the car accelerates when starting on its own.
8. Steering Trimm
-
Trim right
-
Trim left
9. Bind Button
10. Throttle Servo Reverse
Pull trigger
Press trigger up 1x
Press trigger up 2x
Pull trigger 1x
Press trigger up 1x
Press trigger up 2x
11. Battery Voltage
The LED lights up green.
12. Steering Dual Rate
13. ON / OFF Switch
14. Throttle Trimm.
Upper scale
-
Lower scale
-
=
GAS
=
BRAKE
=
BACKWARDS
=
BACKWARDS
=
BRAKE
=
GAS
Trim (increaese gas)
Trim l(reduce gas)
Publicité
