Table des Matières
Publicité
© MOSA
1.0-05/04
INSTALLATION AND ADVICE BEFORE USE
■
Use in open space, air swept or vent exhaust gases,
which contain the deathly carbone oxyde, far from
the work area.
POSITION
Place the machine on a level surface at a distance of at
least 1,5 m from buildings or other plants.
Maximum leaning of the machine (in case of dislevel)
INSTALLATION AND ADVICE
Check that the air gets changed completely and the hot
air sent out does not come back inside the set so as to
cause a dangerous increase of the temperature.
☞
Make sure that the machine does not move during
the work: block it possibly with tools and/or devices
made to this purpose.
MOVES OF THE MACHINE
☞
At any move check that the engine is off, that there
are no connections with cables which impede the
moves.
PLACE OF THE MACHINE AND/OR EQUIPMENTS
In spots where it often rains and/or there are flooded
areas, do not put the machine:
■
in the bad weather
■
in flooded places.
Protect all the electric parts at risk, because water
infiltrations could cause short circuits with damages
at persons and/or things.
The protection degree of the machine is put on the data
plate and in this manual at page "Technical Data".
MAGIC WELD
2.6
M
Publicité
Table des Matières
