Smanos SS-20 Guide Rapide page 4

EN
Installation
The Siren can be placed in any location as long as it is within the
range with K1 Hub
Set the K1 system to Test Mode,
and then trigger the Siren by
pressing the Tampering Switch
on the back of the Siren.
K1 Hub will sound 3 beeps to
confirm that the sensor is placed
within range of the hub prior to
installation.
Install the Siren using either the double-sided tape or the screws
with mollys included in the package.
Notice: Removing the Back Cover off the Siren will result in an
alarm. You can disarm the alarm through your K1 app and then
continue the installation.
Specifications
Model: SS-20
Power: 3V CR123A Li-Mn battery x 4 pcs
Sound: 90 Decibels
Frequency: EAN 8718868403964 868MHz
UPC 859756005223 915MHz
Wireless range: ≤ 80 m (in open area)
Operating conditions:
0-50°C/32° - 122°F, humidity < 90% RH (non-condensing)
Dimensions (L x W x H): 85 x 85 x 37mm/3.35" x 3.35" x 1.46"
EN