Keep Warm Function - ARENDO 304306 Mode D'emploi

5.1 "KEEP WARM" function
The "KEEP WARM" function allows you to maintain a set temperature. Press the
"ON/OFF ( )" button on the base station to switch on the appliance. Select
a temperature using the sensor bar. Then press "KEEP WARM ( ) " to start
the process. Following this, the kettle heats to the set value and maintains this
temperature for 30 minutes.
5.2 Turning off the key sounds
To turn off the key sounds, press and hold the "ON / OFF ( )" button and the"
KEEP WARM ( )"button simultaneously for about 2-3 seconds. Repeat the pro-
cedure if you want to switch on the key sounds again.
Caution! Some sounds should not be turned off for safety reasons.
6. Descaling and cleaning
We recommend decalcifying the kettle at regular intervals depending on the in-
tensity of use. Before cleaning, always unplug the appliance and wait until it has
cooled down completely. Please only use commercially available citric acid-based
descaling agents to descale the water container. The dosage for the descaling agent
can be found in the packaging or on the package insert. The heating plate should
not be cleaned separately. Never work on the heating plate with hard objects. Only
use a cloth moistened with water for external cleaning of the kettle. Do not use
abrasive objects such as a wire brush or steel sponge for cleaning. Please do not
use any cleaning agents that attack the surface or are harmful to health when con-
sumed! To avoid the risk of electric shock, never immerse the appliance, power
cord or plug in water or other liquids.
24
English