4.Whenever you clean the Heat pump filter
unit always clean any build up of fluff from
the surface of the metal plates.
Carefully clean this
fluff off with a damp
cloth,sponge or
cleaner. Never
Fingers.
5. Assemble the two
parts of the filter clean
the surface of the seals
and replace with the 4
clips into the horizontal
position, sure that the catches have been
secured.
Cleaning the tumble dryer
• The external metal, plastic and rubber parts can be clea-
ned with a damp cloth.
2
Water Contaniner
Heat Pump
Unit
Catches
• Clean the front air intake grille regularly (every 6 months)
with a vacuum cleaner to remove any lint, fluff or dust
deposits. Furthermore, remove any lint deposits from the
front part of the condenser and from the filter area, using
a vacuum cleaner every so often.
! Do not use solvents or abrasives.
vacuum
! Have the dryer checked regularly by authorised technical
use your
personnel in order to ensure that the electrical and mechani-
cal parts work safely (see Assistance).
Quick Tips
!Remember to clean your filter and Heat
Pump filter unit after each load.
! Remember to empty your water contain-
er after each load.
! Doing this will keep your machine work-
ing at its BEST!
Handle
Filter
Air Intake
Condenser Cover
GB
7