Troubleshooting; Table: Malfunctions And Possible Causes - Amibot glass AG30 Manuel D'instructions

Troubleshooting

Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into contact
with water.
• If the power cord is damaged.
• If the back-up battery is defective.

Table: Malfunctions and possible causes

Malfunction
The robot does not
move correctly, it skids
on the glazed surface.
The robot stops and
the indicator flashes
RED.
Possible causes
1. The window is too
dirty or damp.
2. The cleaning pad is
too dirty or damp.
The robot does not have
enough suction.
17
Solutions
1. Dry the window.
2. Change the cleaning
pad.
3. Clean the continuous
tracks.
1. Check that the cleaning
pad is correctly
attached to the Velcro.
2. Check that the window
does not have any
faults.
3. The window frames
may be uneven,
however the robot can
be controlled using the
remote control.
EN