Amibot glass AG30 Manuel D'instructions page 14

EN
Operating the appliance
Start the robot
Choose the cleaning mode
Automatic: Before starting its cleaning cycle, AMIBOT scans the
perimeter to analyse the shape of the glazed surface and define its
cleaning route.
Cleaning modes available: Choose from three cleaning modes
using the remote control:
N
1. N Mode: is suitable for particularly long surfaces.
2. Z Mode: is suitable for particularly wide surfaces.
3. Z/N Mode: AMIBOT automatically alternates between Z and N
modes.
AMIBOT Glass can be started by:
• Pressing the Start/Pause (1)
button found on the top of
the robot.
• Pressing the Start button on
the remote control (2).
12
Z