Operating The Appliance - Amibot glass AG30 Manuel D'instructions

Masquer les pouces Voir aussi pour glass AG30:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN

Operating the appliance

Notes before using AMIBOT Glass
Please ensure AMIBOT Glass is plugged in while it is cleaning.
AMIBOT Glass has a back-up battery that charges during use.
The back-up battery powers the robot if it becomes unplugged
or the electricity fails.
Using the back-up battery: the back-up battery must be charged
for around 2 h before using the robot for the first time.
If the glazed surface is dirty, clean a small area before placing the
AMIBOT Glass there.
Do not use the appliance if it is not securely attached to the
window or if it shows visible signs of deterioration.
To reduce the risk of electrical shock, do not place the appliance
near water or other liquids.
Do not touch the power plug or the appliance with wet hands.
Do not pull on the appliance's power cord to avoid causing
possible damage.
Keep the power cord away from sources of heat.
Do not use the appliance if the power cord or plug are damaged.
WARNING: Only use the power cable supplied by the manufacturer
to charge the battery.
The robot batteries must only be replaced by qualified persons.
The remote control uses two non-rechargeable AAA RO3
batteries.
If the remote control is not used for a long period of time, the
batteries must be replaced.
6

Publicité

Table des Matières
loading

Table des Matières