Installing The Safety Cord - Amibot glass AG30 Manuel D'instructions

EN
Operating the appliance

Installing the safety cord

A
1 2
Assembling the safety cord
The safety cord must be fastened to your appliance if you wish to
clean an outside window or a window at a height.
Fasten end 1 of the safety cord around the robot handle (B).
Fasten end 2 of the safety cord to a secure place (C) to stop the robot
from falling.
NOTE: The robot could fall due to a power outage of more than 30 min (AMIBOT
Glass back-up battery life).
B
C
8
A. Safety cord
B. Robot handle (End 1 of cord)
C. Karabiner (End 2 of cord)