Ezviz ez360 Serie Guide De Démarrage Rapide page 8

• If the camera fails to connect to your Wi-Fi network, press and hold the Reset button for 10s
and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the Reset button for 10s to reboot the
device. When the LED indicator flashes red and blue, you can choose a new Wi-Fi network.
3. Enable the Image Encryption
After enabling it, your video and image can be encrypted in transmission.
You can also change the default password.
- Go to the camera settings.
- Tap "Change Password".
- Tap "Edit".
- Enter the original verification code located on the label of the camera.
- Enter new password (6 to 12 characters and numbers).
microSD Card Slot/Reset
MIC
3