Plasmacluster Operation - Sharp AY-XPM7FR Mode D'emploi

PLASMACLUSTER OPERATION

The Plasmacluster Ion generator inside the air conditioner will release positive and
negative plasmacluster ions into the room.
Approximately the same numbers of positive and negative ions released into the air will
reduce some airborne mold.
DISPLAY
NOTES:
• Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next
time you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
• When the PLASMACLUSTER button is pressed while the unit is not operating, the
PLASMACLUSTER operation will be performed without accompanying air conditioning mode
(eg, HEATING or COOLING).
The mode symbol of the remote control will go off and the fan speed can not be set AUTO.
At this time, you may feel HEATING is performed with units in other rooms. Indoor fan will
decrease its rotating speed and will turn ON and OFF depending on the room temperature.
1
During operation, press the PLASMACLUSTER
button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the unit will
light up.
TO CANCEL
Press the PLASMACLUSTER button again.
1
• The PLASMACLUSTER lamp on the unit will turn
off.
E-12
"