Alarm Function; Sleep Function - Loewe SoundVision ID Mode D'emploi

n n
Loewe SoundVision ID
Instructions for Use
Control
Accessories

Alarm function

The device can wake you up at a preset time with one of the available
audio sources.
Setting the alarm time
Call up the Main Menu.
Select Accessories.
Select alarm.
Select hour to set the hour setting for the alarm.
Select minute to set the minute setting for the alarm.
Alarm source: The alarm source previously selected with
the Playback options via Set alarm source is displayed here.
FM radio The selected FM radio station will play when
the alarm goes off
Internet radio The selected internet radio station will play
when the alarm goes off
AUPEO! The selected AUPEO! radio station will play
when the alarm goes off
CD The CD that is inserted will play when the alarm
goes off
Music source The selected Media Home music source will
play when the alarm goes off
➠ If no entry appears in the line Alarm source, first select
a playback medium (e.g. internet radio), and then
set the current source in the respective menu Play-
back options with the option Set alarm source as an
alarm tone.
Activate/Deactivate alarm
Activate/Deactivate the alarm function by using timer
active - on/off.
The symbol appears at the top edge of the screen.
This shows that the alarm is switched on.
- 44 - - 44 -
Snooze function
Press snooze when the alarm goes off.
The alarm stops and automatically starts again in ten
minutes.
Volume up/down.
Switch off the alarm
Press off when the alarm goes off.
The alarm clock stops.
➠ The alarm function is deactivated after the alarm is switched off.
Activate the alarm function again as described under "Activating/
Deactivating the alarm function".

Sleep function

You can listen to music for a set amount of time and the device will
then switch off by itself.
Setting the duration
Select the desired music source.
Call up the Main Menu.
Select Accessories.
Select sleep timer.
Select Minutes to set the duration in minutes.
Activate/Deactivate the sleep function by using timer
active - on/off.
The symbol appears at the top edge of the screen.
This shows that the sleep function is switched on.