Handsfree Function - Loewe SoundPort Mode D'emploi

SoundPort / SoundPort Compact / SoundPort Mini
Operating instructions

Handsfree function

Handsfree function
The SoundPort must be coupled and linked via Bluetooth (see page 44) or Con-
nectivity Easy Pairing (see page 45) with your mobile phone.
Loud ambient noise impairs the quality of the handsfree function. Make sure that
there is a quiet environment or abstain from using the handsfree function if there is
no proper environment.
To achieve a high level of intelligibility between callers, speak only alternately. The
distance between the caller and the SoundPort should be between 0.3 m and 1.2 m.
To accept an incoming call, the SoundPort must be switched on (see page 38) and
Bluetooth must be selected as the source (see page 39).
The LED display
In case of an incoming call, a ring tone sounds.
The LED display
An audio playback will be paused in this case.
Answer the incoming call by pressing the key
key on your mobile phone.
The LED display
When speaking turn your face to the front
in the centre of the speaker cover (see page 35).
Set the volume on the SoundPort to a medium level using the keys +
also page 49).
Finish the telephone conversation by pressing again the key
corresponding key on your mobile phone.
The LED display
50
8 indicates Bluetooth as source.
8 flashes quickly in white.
8 lights up in white.
resumes to the colour of the last selected source again.
8
3 on the SoundPort or the corresponding
9 of the SoundPort. The microphone is located
3 on the SoundPort or the
4 and – 5 (see