Wireless Network; Setting Time; Setting Up Bluetooth Devices - Loewe SoundVision ID Mode D'emploi

n n
Loewe SoundVision ID
Instructions for Use
Start-up
It is now possible to give the unit an individual name for
identification in the network.
In the Host name line please press the <Name> field and
enter the desired name via the keypad that appears.
Confirm entry with Set.
You can now set whether a proxy server is present in
the network.
Select desired setting for Proxy server - yes or no.
Confirm selection with Proceed.
If you have selected the setting Proxy server - yes, the
entry fields for the proxy server will appear in the next
step. Tap on the corresponding fields.
Proxy Server Name Enter the name for the proxy server via the
keypad that appears.
Proxy Server Port Enter the proxy server port via the keypad
that appears.
Confirm selection with Proceed.
The unit now attempts to establish a network connec-
tion with the current settings.
If these settings are correct, the network connection will
be tested with the currently set parameters.
If the test had a positive result, a corresponding message
will be displayed.

Wireless network

Call up Change Settings.
Select desired Connection type - wireless for the network
connection.
The following options are now available:
manual The unit searches for wireless (WLAN-) networks
Confirm selection with manual.
The unit now searches for wireless networks in the sur-
roundings. A list of the networks found is then displayed.

Setting time

The unit's time is automatically updated via time servers in the Internet
(if your home network has access to the Internet). To keep the time
display correct for your region, the deviation from the GMT time (time
zone) and the summer/normal time can be set. You can also set the
time manually.
Call up Options menu.
Call up the Settings menu.
Select Time option.
Set Mode - automatic or manual option.
- 34 -
Automatic
Time zone The time zone in which the unit operates can
be set
Daylight Saving Summer time and normal time can be set.
➠ The time zone CET corresponds to Central European Time. UTC
or WET corresponds to World Time or West European Normal Time.
EET corresponds to East European Time or Central Euopean Summer
Time.
Manual
Set hours time with Hour.
Set minutes time with Minute.
Confirm setting with Set.

Setting up Bluetooth devices

You can connect music sources, speakers or headphones wirelessly
over Bluetooth. The devices must support the Bluetooth protocol A2DP.
Call up the Options menu.
Call up the Settings menu.
Select the Bluetooth option.
Select the option Bluetooth - on.
Select the option Continue.
Searching
Smartphone
BT-Speaker
The system will now search for Bluetooth devices in the
vicinity of SoundVision ID. Any devices that are found
will be shown on the left hand side of the list.
Select Pair for the desired device.
You may need to confirm this on the device that is being
connected as well. Please OK this when asked.
You can delete connected devices from the list by using
the option Remove.
End the search with Back.
➠ The Bluetooth connection can only be initiated by SoundVision ID.
➠
You may need to activate the "visibility" function in the settings of
the device that is being connected to.
20:15
Settings
Network
Remove
Bluetooth
Pair
Back
International
Time
Sound