Subwoofer Placement; Speaker Placement; Installation - Teac LS-WH01 Mode D'emploi

Installation

Satellite speaker placement
In order to prevent vibration and slipping, attach the
included anti-slipping pads to four places on the bottom
of each speaker.

Subwoofer placement

The subwoofer in this system uses an HVT (Horizontal-
Vertical-Transforming) structure to minimize vibration,
making it possible to place it on the top of a table, for
Anti-slipping pads
example.
In order to prevent the sound from being blocked, leave
an open gap of at least 1 cm (1/2") above and below the
speaker.
Vertical placement of subwoofer
This subwoofer should ordinarily be placed horizontally,
but vertical placement is also possible.
When placing the subwoofer vertically, remove its feet
and attach the included cover pads. When installing the
subwoofer vertically, attach the included anti-slipping
pads to it in four places.
In order to prevent the sound from being blocked, leave
open gaps of at least 1 cm (1/2") on each speaker side.

Speaker placement

For stereo playback, the left and right speakers should be
placed so that they form an equilateral or isosceles trian-
gle with the listener at the top corner.
Listening position
8