Basic Operations; Automatic Power Saving Function - Teac LS-WH01 Mode D'emploi

1
Press the STANDBY/ON button to turn the
unit on.
o Turn the amp on last to prevent the sudden out-
put of loud noise.
2
Operate the playback device.
Refer to its operation manual.
3
Adjust the volume.
Use the amp to adjust the volume of the satellite
speakers.
Use the VOLUME knob on the subwoofer to balance
its level with the satellite speakers.
4
Adjust the phase.
Use the PHASE switch to control the phase of the
low-frequency signal output from the subwoofer.
Sometimes the placement of the subwoofer and
satellite speakers causes the phase to differ, making
the low frequencies uneven. Try playback with this
switch set to both NORMAL and REVERSE and use
the setting that sounds more natural.

Automatic power saving function

This product is compliant with the European ErP direc-
tive for standby power.
In order to comply with this directive, if 25 minutes
elapse without any audio input to the subwoofer, it will
automatically enter standby and the power switch indi-
cator will become unlit.
When audio is input to the subwoofer again, it will end
standby and the power switch indicator will light.
12

Basic operations