Hoses; Diffuser Cap Assembly - Workshop WS0500WM0 Manuel Du Propriétaire

Hoses (14 Foot Locking Hose &
7 Foot Expandable Locking Hose)
The 14 Foot Locking Hose and the 7 Foot
Expandable Locking Hose have an
adaptor that can be used to connect the
hose to the vacuum port on the Vac or to
the male end of another hose. Both 7 foot
and 14 foot hoses can be used
connected together or independently from
one another.
Both the 7 foot and 14 foot hoses have a
locking adaptor at one end that will
connect to the Vac, and a friction fit at
the other end, which will connect to all
the 1-7/8 inch accessories or a second
hose.
To connect these two hoses together, first
connect the 14 foot hose to the Wet/Dry
Vac. Next connect the 7 foot hose to the
14 foot hose by inserting the friction end
of the longer hose into the larger locking
end of the shorter hose. This will create a
friction connection.
Vacuum Inlet Port
Friction
End
Vacuum Inlet
Port
ACCESSORIES (continued)
Male End
of Hose
Locking Hose

Diffuser Cap Assembly

Connect the lanyard to the attachment
tab on the Vac motor assembly to keep
the diffuser attached to Vac when using
the blower port. The diffuser cap can be
used in the exhaust port of the Wet/Dry
Vac. Installing the diffuser cap will allow
you to diffuse the exhaust air in any
direction and reduce the intensity of the
exhaust force.
Diffuser
12
Attachment Tab
Lanyard