Troubleshooting - ECOVACS ROBOTICS DEEBOT Slim Manuel De L'utilisateur

Please use this chart to troubleshoot common problems using DEEBOT SLIM.
No. Malfunction
DEEBOT SLIM
1
will not charge.
DEEBOT SLIM
gets into trouble
2
while working
and stops.
DEEBOT SLIM
returns to the
3 Charging Dock
before it finishes
cleaning.
Possible Causes
DEEBOT SLIM is not powered
ON.
DEEBOT SLIM has not made
a connection with the Charging
Dock.
Charging Dock is unplugged while
DEEBOT SLIM is powered ON,
which causes battery consumption.
The battery is completely
discharged.
DEEBOT SLIM is tangled with
something on the floor (electrical
cords, drooping curtains, area rug
fringe etc.).
When battery power gets low,
DEEBOT SLIM automatically
switches to Return to Charger
Mode and returns to the Charging
Dock to recharge itself.
Working time varies according
to floor surface, room complexity
and the selected Cleaning Mode.

5. Troubleshooting

Solutions
Move DEEBOT SLIM's Bottom Power
Switch to the ON position.
Be sure that DEEBOT SLIM's Charging
Contacts have made a connection
with the Charging Dock Pins. You may
move the robot manually to make the
connection if necessary.
Plug in the Charging Dock and ensure
DEEBOT SLIM is powered ON. Keep
DEEBOT SLIM on the Charging Dock
to make sure it has full battery to work
at any time.
Re-activate the battery.
Place DEEBOT SLIM on the Charging
Dock by hand, remove after charging
for 3 minutes, repeat 3 times; then
charge normally.
DEEBOT SLIM will try various ways
to get itself out of trouble. If it is
unsuccessful, manually remove the
obstacles and restart.
This is normal. No solution necessary.
This is normal. No solution necessary.
17
EN