EIBENSTOCK ESD 162 Notice Originale page 16

Technical Data
Percussion Diamond Core Drill ESD 162
Nominal voltage
Power drain
Rated current
Frequency:
No-Load speed:
Percussion frequency:
Bit holder:
Max. drilling diameter concrete:
Protection class:
Degree of protection:
Weight:
Order No.
Interference suppression acc.to:
Available add-ons:
Item
Diamond drill rig BST 162H
Fastening set concrete/stone
Diamond drill bit dry Ø 82, 102, 132 and 162mm
Copper ring for easier drill bit removal
Wet/dry deduster DSS 35 M iP
For further information about our products and our wide range of
accessories please see: www.eibenstock.com.
Diamond core drill with 2 open-end wrench (SW32 and SW41) and
instruction manual in transport case.
Application for Indented Purpose
The diamond core drill ESD 162 is indented only for professional use and
may be
With an appropriate drill bit, the tool can be used for drilling of concrete,
stone, bricks, sand-lime bricks and pore concrete.
For drilling jobs with diameters above 132mm (102mm in reinforced
concrete) it is a must to use a suitable drill rig.
The machine may be used exclusively in conjunction with a vacuum
cleaner of dust category M.
Concrete and reinforced concrete are to be drilled only with soft impact.
The user alone is liable for damage caused by improper use.
Supply
used only
50/60 Hz
0-1100 rpm
max. 22000/min
1 ¼" UNC - R½¨ i
82-202 mm (brickwork up to 162mm)
approx. 6.7 kg
EN 55014 and EN 61000
by instructed
15
230 V ~
2200 W
10,0 A
I
IP 20
03E25000
Order No.
0963W000
35720000
35450000
09919000
personnel.