Table Des Matières; Introduction; Areas Of Application - FLORABEST FTS 1100 B2 Traduction Du Mode D'emploi D'origine

GB IE
Content
Introduction .................................4
Areas of Application ....................4
General Description ......................5
Scope of Delivery............................ 5
Functional description ...................... 5
Overview ....................................... 5
Technical Data ..............................5
Performance data ............................ 6
Notes on Safety ...........................6
Symbols in the manual ..................... 6
Symbols on the equipment ............... 6
General notes on safety ................... 6
Initial Operation ...........................8
Positioning/Hanging ....................... 8
Mains Connection ........................... 9
Connecting the Pressure Line ............. 9
Adjustment of the float switch .......... 9
Operational start-up ...................... 10
Cleaning/Maintenance/Storage ..10
General cleaning instructions .......... 10
Cleaning the Fan Wheel ................ 10
Storage........................................ 11
Waste Disposal and
Environmental Protection ...........11
Guarantee .................................12
Repair Service ............................13
Service-Center ............................13
Importer ....................................13
Troubleshooting .........................14
Replacement parts/Accessories ..14
Translation of the original EC
declaration of conformity ........... 68
4

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Areas of Application

The dirty water submersible pump is a
drainage pump and designed for trans-
porting water and sewage water (max.
particle size 35 mm) up to a temperature
of max. 35 °C.
It is suitable e.g. for pumping around and
pumping out basins and containers, for
pumping out flooded cellars, and for ex-
tracting water from wells and shafts.
This equipment is not suitable for industrial
use. Industrial use will invalidate the guar-
antee.