Rfid; Cloud Ocpp; Status Indicators - Gewiss JOINON WALLBOX I-CON BASIC Manuel D'installation Et D'exploitation

8.2. RFID

RFID mode indicates that the session has to be activated and terminated using the RFID cards supplied by the
provider and added to the local station White List beforehand.

8.3. CLOUD OCPP

CLOUD mode indicates that the charging station is connected to a control and management platform. Thanks to
this platform, the station can be controlled and monitored while it's operating, and the recharging sessions can
be saved. The end user accesses the service via an app or using RFID cards associated with his/her own profile,
in complete autonomy.

STATUS INDICATORS

9.
The charging station uses RGB LEDs to inform the client about the status and indicate which actions need to be
carried out. The meanings of the various colours are explained below.
Colour and status
Fixed green
Flashing green
Fixed blue
Flashing blue
Fixed red
Flashing red
Flashing white
None
LED
Description
The station is ready to start a charging session. No problem detected.
This colour is also used to indicate the correct acquisition or deletion of the RFID cards. The fixed
green colour will be visible for 2 seconds, preceded and followed by FLASHING WHITE (RFID card
acquisition) or FLASHING RED (RFID card deletion)
The recharging station is waiting for the vehicle to be connected or disconnected.
The charging session is in progress and the vehicle is absorbing energy.
The charging session is in progress, but the vehicle is not absorbing energy (battery charged, or
vehicle not ready for recharging).
An internal error has been detected by the station, and the charging process cannot be
continued.
or
The RFID card used is not in the local white list.
The station has gone into RFID card deletion mode, to delete the cards from the local White List
The station has gone into RFID card acquisition mode, to save the cards in the local White List
The charging station does not have the necessary power supply
47