Control Panel; Intended Use - Worx LANDROID Mode D'emploi

3.

Control panel

Battery indication light
Display battery/machine
status
START
Start mowing
Start
8
1) After the boundary wire installation, you can start using the Landroid
wire installation).
2) Turn the main switch (8) to "I"(on ).
3) Press , then press
4) Press
and
®
Landroid will work continuously until reaching low battery power level and then it will return to the charging base. Once
charging is complete, Landroid
schedule.
4.

Intended Use

The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better
looking lawn than ever before. Depending on the size of your lawn, the Landroid
time or frequency with no restrictions (Only for specific model, please check Technical Data & Declaration of Conformity).
Lawn Mowing Robot
to start mowing.
®
to make Landroid go to the charging base.
®
will automatically resume mowing or it will stay in the charging base according to mowing
Error indication light
Display error messages
HOME
Send Landroid
charging base during
operation and activates
charging
OK
Confirm any setting/Enter
Wi-Fi connection mode
STOP
To stop Landroid
operation
®
(Please refer to Installation guide for boundary
®
may be programmed to operate at any
®
to its
®
during
EN