Remote Mobile Control; Boundary Wire Basics; Pegging The Boundary Wire; Burying The Boundary Wire - Worx LANDROID Mode D'emploi

the motor, and can also cause loose traction and slippage while working.
®
Your Landroid is afraid of Lightening Storms. In case of a Lightening Storm, protect the Landroid
Charging Base (3), disconnecting the Boundary Wire (17), and making sure the Landroid
®
Your Landroid loves mowing grass and requires the Cutting Blades (12) to be kept in good condition to cut at its best. The
®
Landroid can do most things by itself, but will need your help sometimes to prevent damage to itself.
• Never let the Landroid
• Remove or prevent access to obstacles that the Landroid
• Remove all debris and foreign objects from your lawn.
6.

Remote Mobile Control

specific model, please check Technical Data & Declaration of
Conformity)
®
Your Landroid is able to connect with smart phone. All the general
settings can be changed via the Landroid
also the APP can show the machine status and error messages.
To connect smart phone to your Landroid
Step 1: To download the Landroid
the QR code below or download it from Playstore (google-android),
AppleStore (Apple-ios) or our website www.worxlandroid.com.
Step 2: Connect the Landroid
main switch to "I" (on) to turn on your Landroid
for more than 3 seconds and Landroid
alternatively red and blue in color for about 10 seconds.
Step 3: Open the Landroid
Step 4: If the connection is OK, your Landroid
®
Landroid will go out.
NOTE:
1. If your Wi-Fi information has been changed, Landroid
®
2. When Landroid
executed immediately. However, the instruction will be executed after the Landroid
3. For stable signal connection, it is recommended to install Wi-Fi extender at the weak or no Wi-Fi signal areas.
12
7.

Boundary Wire Basics

7.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (20) to set the correct
distance from the border of your lawn (more than 26cm*).
* This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
If your neighbor also uses a Landroid
of at least 0.5 metres between your Boundary Wire and your
neighbors.
The Boundary Wire must outline the intended mowing
area exactly. Your Landroid
or coils of Boundary Wire that are not part of its mowing area (See
Fig. H). If there is excess Boundary Wire after the mowing area
has been outlined, then cut it off and store this additional wire in a
separate location. However, it is important to leave the necessary length where it connects to the Charging Base so it can
be connected and still remain buried.

7.2 Burying the Boundary Wire

If you are planning to bury the Boundary Wire then it should be noted that when entering its Charging Base for the first time,
®
your Landroid may find problems with the way you have laid the wire. It is recommended to first peg down the Boundary
Wire to the lawn so it is easy to make adjustments if necessary. This will allow the Landroid
environment and ensures it will successfully work with the Charging Base before the Boundary Wire is buried.
When you have completed installing the boundary wire, it is recommended that you ask Landroid
wire by pressing
Lawn Mowing Robot
®
travel over gravel.
®
App in your smartphone,
®
:
®
APP , use your smartphone to scan
®
in a Wi-Fi environment. Turn the
®
®
will enter the Wi-Fi connection mode. Then the error indication light will flash
®
APP , it will automatically scan the Landroid
®
is located at low or no Wi-Fi signal area, the instant instruction sending from mobile APP may not be
®
, then you must keep a spacing
®
will become confused by extra bends
and .
®
could accidentally climb on and damage its Blade Turning Disc.
(Only for
. Hold the button
®
and connect, then Press OK to confirm.
APP will show successfully connected and the error indication light on
®
needs to be re-set according to Step 1 to 3.
H
®
by unplugging the
®
is not allowed to charge.
®
returns back to good signal area.
®
to become adjusted to its new
®
to follow the boundary
EN