SilverCrest SSJBK 300 B2 Mode D'emploi page 21

SAFETY CUT-OUT / RESET FUNCTION
►
NOTE
►
SSJBK 300 B2
If the appliance turns itself off, the safety cut-out has tripped. The appliance
switches itself off before the motor can be damaged due to overheating,
e.g. because pieces of food have got stuck and the motor has blocked. The
appliance cannot be switched back on until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again:
–
Set the On/Off switch
the power cable
down for 10–15 minutes.
–
Turn the housing lid
towards the marking on the sieve tray holder
–
Remove the housing lid
–
Remove the fruit or vegetable pieces causing the blockage.
–
Carefully remove the sieve tray
over.
–
Insert the plug of the power cable
–
Press the RESET button
appliance base
–
Pull the plug of the power cable
appliance base
–
Reassemble the appliance, insert the plug of the power cable
into a power socket and continue with juice extraction.
If the juice container
dripping out of the juice outlet
the stopper again after you have replaced the empty juice container
under the juice outlet
to the "O" position and pull the plug of
out of the socket. Allow the appliance to cool
anticlockwise until the
.
and turn the appliance base
into a mains socket.
that is on the underside of the
.
out of the socket and turn the
over.
is full and you want to empty it while juice is still
, block it off using the stopper
.
marking points
.
. Open
GB │ IE │
17 ■