Using The Menus - Victron energy BMV 600 Manuel

2.4 Using the menus

There are four buttons that control the BMV. The functions of the buttons
vary depending on which mode the BMV is in. When power is applied, the
BMV starts in normal mode.
Button
Normal mode
Hold for 3 seconds to
Setup
switch to setup mode
Switch between the
Select monitoring and historical
+ Move up one item.
- Move down one item.
-When not editing, hold this button for 3 seconds to
switch to normal mode.
-When editing, press this button to confirm the change.
When a parameter is confirmed, it will be checked for
validity. If the value is valid it is stored. If the value is
invalid, the display blinks 10 times and the nearest valid
value is displayed but not stored. The value can be
corrected if needed, and can then be stored by pressing
this button again.
-When not editing, press this button to begin editing the
current parameter.
-When editing, this button will advance the cursor to the
menus.
next editable digit.
-When not editing, this button moves up to the previous
menu item.
-When editing, this button will increment the value of
the selected digit.
-When not editing, this button moves down to the next
menu item.
-When editing, this button will decrement the value of
the selected digit.
Function
Setup mode
9