ARENDO 303062 Mode D'emploi page 12

8. Cleaning and maintenance
Unplug the power cord from the outlet. Clean the base unit with a slightly damp-
ened soft cloth. Caution! Do not use liquids to clean the base unit and the power
connections. Do not use any aggressive, strong or abrasive cleaning agents.
You can clean the blender jar and the smoothie jar, the lid and the blade unit in
soapy water. The blender jar, smoothie jar and the lid can also be cleaned in a
dishwasher at low temperatures.
To clean the device quickly and immediately after use, fill the blender jar with
warm water up to about 60%, add some dishwashing liquid and let the appliance
run briefly. Then, take the blender jar and shake it. Finally, rinse only the blender
jar and the blade unit using clean water until all residue and traces of the deter-
gent are removed.
Allow all parts of the device to dry completely.
9. important safety guidelines for this device
• Never use this device without the lid placed! There is a
risk of injury!
• Always check the device for any damage before operating it. Do
not operate the device if the cable, the plug or the device show
any visible signs of damage.
• Do not make any modifications or repairs to the device.
• Caution! The blade unit is very sharp!
• Plug the device only into a properly installed power socket.
• Never leave the blender unattended and choose a location in
which the device is out of reach of animals and/or children.
• Children should not play with the device.
• Children above 8 years of age and persons with restricted physi-
cal, sensory and mental abilities may use the device only if they
are instructed or supervised by a person who is responsible for
their safety.
• Keep the blender out of reach of children under 8 years of age.
• Keep it on an appropriate surface so that it does not tip over.
• Do not keep the blender next to heat sources (e.g., electric stove).
• Unplug the power plug when the device is not in operation or
during cleaning.
12
English