camry Premium CR 1180 Mode D'emploi page 5

. Rotate the UP/DOWN roll to input numbers/letters.
Once you are on the letter you want, press Right to move to the next entry.
When you are at the end the input, press Enter to confirm. You may press Left to move to previous entry.
Rotate the volume reel to adjust the volume.
3. Network
. Wireless Network Configuration
Enable / disable WiFi network. When you enable the WiFi network, the system will automatically.
Select you required router.
You may refer to the section 3, Getting Started for the network setting.
. Wireless Network (WPS PBC)
If you are using a router with WPS/QSS button, you may set up the network connection simple via WPS function. Enter it go to press
the WPS/QSS button on your router within 120seconds. The connection between the router and CR 1180 will then be configured
automatically.
. Manual Configuration
You can choose DHPC (which IP assigned automatically) or manually input IP address for wireless network connection.
When you select manual setting for wired connection, the following to be entered:
1. SSID (the name of Access Point);
2. IP Addresses;
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage) specific network if you have setup more than one network connection within an area.
Check Network when Power On
Enable / disable WiFi network.
When you enable the WiFi network, the system will automatically search the available AP. Select you required AP.
Enter WEP or WPA code to connect the WIFI.
If the wireless network connection is not existed or failed, the icon at the top left corner will have a cross on it.
4. Date & Time
The date and time settings can only be made if the Internet radio is connected to a
wireless network.
Setup the date and time: The internet radio takes the date and time automatically
from a central server once a network connection has been established. However, you
will need to change the time manually to account for the change from winter time to
summer time.
Set time format display as 12 Hour or 24 Hour,
Set date format in the positions of YY (year), MM (month) and DD (day )-
YY/MM/DD, DD/MM/YY or MM/DD/YY.
Turn on/off the Daylight Saving Time (DST).
Confirm with OK or by pressing the reel.
With a wireless network connected ,GMT (+01:00) time is a time reference of time
setting . Add or deduce the hour according to your time zone when you set the time.
Alarm
There are three independent alarms – 2 alarms of absolute time setting (Alarm 1 and Alarm 2) and 1 alarm for relative time setting (NAP
Alarm ). Select Alarm in the menu.
The first two alarms are similar to the normal alarm, turn on then set the time and set it alarms Every day, Once or every specific day of
week.
Select Alarm time. Set the respective values using the UP/DOWN reel on the device and switch to the next entry field using the Right
Confirm by pressing the reel.
Choose Sound to set the sound to Beep, Melody or Internet Radio . An alarm symbol will appear on the top of the display next to the time.
Note that the alarm source is from the favorite internet radio stations if Alarm Sound is set to be Internet Radio. It Can only set one / same
station for alarm 1 and Alarm 2. When it reached the alarm time , if set the alarm source is internet Radio, the unit connects to the
internet if the set network is available, Therefore there may be some delay from the alarm to the radio play. If no network is connection
in one minute, the alarm will change to melody automatically.
After NAP Alarm is set, it alarms once in 5/10/20/30/60/90/120 minutes depending on which one you have set.
You may choose Alarm Volume to configure the volume of the alarms.
When the alarm(s) is /are set, there will be a clock icon at the bottom of the display. The clock icon with alarm time will also clearly display
on the standby mode screen.
During alarm, press Power I Menu button to stop the alarm, Press the Enter button to enter to snooze mode. It will alarm again in 5
minutes.
Language
Select the Operating System Designated language: English /German/ French /Hungarian/ Czech/ Slovakian /Polish /Turkish.
5. Weather
CR 1180 is able to display the current weather information under standby mode. Turn on Standby Display and set Temperature Unit(℃ or
5