Specific Safety Rules; Important Safety Instructions - Panasonic EY3640 Instructions D'utilisation

III .
SPECIFIC SAFETY
EN
RULES
1) Wear ear protection. Exposure to noise
can cause hearing loss.
2) Be aware that this tool is always in an
operating condition, since it does not have
to be plugged into an electrical outlet.
3) Hold power tools by insulated gripping
surfaces when performing an opera-
tion where the cutting tool may contact
hidden wiring.
Contact with a "live" wire will make ex-
posed metal parts of the tool "live" and
shock the operator.
4) If the bit becomes jammed, immediately
turn the trigger switch off to prevent an
overload which can damage the battery
pack or motor. Use reverse motion to
loosen jammed bits.
5) Do NOT operate the Forward/Reverse
lever when the trigger switch is on. The
battery will discharge rapidly and damage
to the unit may occur.
6) When storing or carrying the tool, set
the Forward/Reverse lever to the center
position (switch lock).
7) Do not strain the tool by holding the
speed control trigger halfway (speed
control mode) so that the motor stops.
The protection circuit will activate and
may prevent speed control operation. If
this happens, release the speed control
trigger and squeeze again for normal
operation.
8) Be careful not to get dust inside the
chuck.
9) Do not touch the rotating parts to avoid
injury.
10) Do not use the tool continuously for a long
period of time. Stop using the tool from
time to time to avoid temperature rise and
heat overload of the motor.
11) Do not drop the tool.
Symbol
V
Ah
WARNING
Some dust created by power sanding, saw-
ing, grinding, drilling, and other construction
activities contains chemicals known to the
State of California to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products
• Arsenic and chromium from chemical-
ly-treated lumber.
To reduce your exposure to these chem-
icals: work in a well ventilated area, and
work with approved safety equipment, such
as dust masks that are specially designed
to fi lter out microscopic particles.
IV .
FOR BATTERY
CHARGER &
BATTERY PACK
Important Safety Instruc-
tions
1) SAVE THESE INSTRUCTIONS - This
manual contains important safety and
operating instructions for battery charger.
2) Before using battery charger, read all
instructions and cautionary markings on
battery charger, battery pack, and product
using battery pack.
3) CAUTION - To reduce the risk of injury,
charge only Panasonic Battery pack as
shown in last page. Other types of batter-
ies may burst causing personal injury and
damage.
- 8 -
Meaning
Volts
Direct current
Electrical capacity of battery
pack
To reduce the risk of injury
user must read and under-
stand instruction manual.