Kimex 164-6540 Manuel D'utilisation page 141

SWA Send wake up alarm
STWA
Stop wake up alarm
SEA
Send emergency alarm
STEA
Stop emergency alarm
UNP Send Message
Send Message/Trigger
TN
notification
DBOOTC Disable Bootcaster
EBOOTC Enable Bootcaster
DDHCPC Disable Dhcp client
EDHCPC Enable Dhcp client
RTVP Return TV Main Page
GTSURL
Get TV Portal URL
Set First Time Installation
by taking and saving
system language
SFTI
and txt language text
parameters; then reboots
the system.
Set Default First Time
Installation by reseting
the parameters set by
SDFTI
SFTI and returning to
default FTI settings; then
reboots the system.
SHM
Set Hotel Mode
UNTP Update Date and Time
SNTP Set NTP Server IP
WAU
SW Auto Upgrade
Set Remote Control
SRC
Code
string (alarm url (with .ts file
extension) )
no parameter
string-string (alarm url -
emergency message)
[message content should be
"word1+ word2+word3 ..."]
none
string-int (message text - 0)
[message content should be
"word1+ word2+word3 ..."]
int (key id (900<= id<=904))
none
none
none
none
none
none
string-string
[system language (look at
abbreviations) - txt language
text (look at txt languages)]
none
int ( 1-enabled/ 2-
disabled)
none
string-int ("auto" / ntp server
path - 0 )
int ( 1-enabled/ 2- disabled)
int (2/3/4)
English - 51 -
#WakeupAlarm is set
#WakeupAlarm stopped !!!
#Emergency Alarm is set !!!
#Emergency Alarm is stopped !!!
#Message Sent in SUCCESS !!!
#Message Sent in SUCCESS !!!
#BOOTCASTER_DISABLED in
SUCCESS !!!
#BOOTCASTER_ENABLED in
SUCCESS !!!
#DHCPC_DISABLED in
SUCCESS !!!
#DHCPC_ENABLED in SUCCESS
!!!
#Refresh Done in SUCCESS !!!
#StartUp url is ....
#System reinitialised !!!
#System will be reinitialised !!!
#Hotel Mode is enabled/disabled
#Internet connection successful
file_size=2048
#Date and Time is being updated
from NTP Client
or
#No Internet Connection! Date and
Time cannot be updated
#Auto : forced_ntpserver file
deleted - SUCCESS !! or#Forced_
ntpserver written - SUCCESS !!
#Auto Software Update Availability
- ENABLED !!
#Remote Control system Code
set to ...