Kimex 164-6540 Manuel D'utilisation page 134

Command
FREEZE
ENERGYSAVING
GETENERGYSAVING
POWERSAVE
GETPOWERSAVE
SETBACKLIGHT
BACKLIGHTDIM
SETBACKLIGHTLEVEL
GETBACKLIGHTLEVEL
BLUEBACK
COLOURTEMP
GETCOLOURTEMP
GETPICTUREMODE
PICTUREMODE
GETCONTRAST
SETCONTRAST
GETBRIGHTNESS
PICTURE COMMANDS
Description
Freeze/Unfreeze
Set energy saving
mode. (if enabled from
profile)
Get energy saving
mode. (if enabled from
profile)
Set power save mode. str-int n (n = ON, n = OFF)
Get power save mode no parameter
Set backlight pin
status.
Set backlight dimming
level. (if enabled from
profile)
Set backlight level.
Get backlight level.
Set bluebackground
state.
Set colour
temperature.
Get colour
temperature.
Get picture mode.
Select picture mode.
Get picture contrast
value.
Set picture contrast
value.
Get picture brightness
value.
English - 44 -
Parameter
no parameter
Set energy saving mode. (if
enabled from profile)
no parameter
str-int n (n = ON, n = OFF)
str-int n (n = low, high, off)
int n (0 ≤ n ≤ 100)
no parameter
int n (0 = OFF, 1 = ON)
str-int n (n = normal, warm,
cool)
no parameter
no parameter
TV ----> int n (1 = dynamic,
2 = natural, 3 = cinema, 4 =
game, 5 = sport)
Signage ----> int n (1 =
signage, 2 = natural, 3 = text,
4 = game, 5 = sport)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
Return
#*Video is frozen
or
#*Video is unfrozen
#*setEnergySaving() set to n
or
#*Wrong parameter entered
#*The energy saving mode is ...
#*set Power save mode to ON,
backlight to its default value
or
#* Power save mode can not set
to ON, because its default value
is OFF
or
#*set Power save mode to OFF,
set to last backlight mode
#*Powersavemode is ON
or
#*Powersavemode is OFF
#*setBacklight port to ON
or
#*setBacklight port to OFF
#*setBacklightDimming() set to n
#*Backlight level set to n
or
#*NACK
#*The backlight level is ...
#*set bluebackground state to n
#*setColourTemp() set to n
#*Colour temp is ...
#*Picture Mode is ... for current
source
#*setPictureMode() set to n
or
#*Incorrect picture mode
parameter entered
#*THE CONTRAST VALUE : ...
#*Picture contrast value is set to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range 0-100
#*THE BRIGHTNESS VALUE : ...