Care And Maintenance; Customer Service; Disposal - Rothenberger ROCAM 4 Instructions D'utilisation

4

Care and Maintenance

Always clean the device after every pipe inspection!
 Turn the device off with the power button on the monitor and remove the battery, and pull
the electrical plug.
 Close the cover and press until it clicks.
 Take off the reel (4) from the ROCAM
 Only clean the reel when removed from device.
The device must be protected against water and must only be cleaned with a damp
cloth!
 Insert dried reel back into the device (see section 3.3).
5

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone: + 49 (0) 61 95 / 800 – 8200
Fax: + 49 (0) 61 95 / 800 – 7491
Email: service@rothenberger.com
www.rothenberger.com
6

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
14
®
4 (see section 3.3) and clean under running water.
ENGLISH