Vetus ILTCOND Manuel D'installation Et D'utilisation page 15

When viewed from the tank, the air-relief
pipe should be fitted straight up.
• Water supply pipe
Fit the tap water supply pipe (12), 13 mm
(1/2") internal diameter, between tank and
pump.
3
4
7
2
13
1. Water supply
2. Connection lid
3. Lid nut
4. Filling connection
5. Vent (hose pillar)
6. Water suction line
7. Blinddeksel gat voor niveaugever
8. Filler cap
Connection kit for fresh water tanks
5
12
1
The pump must be self-priming!
And can be mounted at any height in rela-
tion to the tank.
2 5 Check
Check the system for any leaks. Extraction pres-
sure 20 kPa (0.2 bar)(4.4 psi).
14
11
9
9. Filler hose, ø 38 mm
10. Air-relief nipple
11. Air-relief pipe, ø 16 mm
12. Tap water pipe
13. Water pump
14. Goose neck
ENGLISH
min. 40 cm (16")
10
8
15
050106.01