Vetus ILTCOND Manuel D'installation Et D'utilisation page 13

APT100 tanks
These tanks have already been fitted with a
collar with screw thread, remove the nut and
remove the blind plate and the gasket.
2 3 Fitting the connection cover
Clean the inside of the tank before fitting the
connection cover
• Water suction line (1)
Make the suction pipe to the correct length
- the bottom must be about 6 mm from the
bottom of the tank and place the suction
pipe on the connection.
A
Connection kit for fresh water tanks
A + 5 mm
ENGLISH
1
ca. 7 mm
ATANK...
APT100
13
050106.01