Vetus ILTCOND Manuel D'installation Et D'utilisation page 12

Fix the tank securely with the fitting straps
from the installation kit; these will accommo-
date the expansion of the tank.
Fitting in sailing boats
When fitting remember that the filler hose
must always be positioned on the same side of
the boat as the tank.
This prevents too high a pressure from possibly
occurring in the tank when sailing heeled.
2 2 Preparation
The tank must have a threaded connection.
ATANK tanks (42 to 390 liters)
An inspection cover ILT120 must be fitted to
these tanks.
Mounting inspection lid
• Mount the inspection lid ILT120, this is not
included in the supply. For installation in-
structions consult the manual supplied with
the inspection lid.
• Do not install the nut with the blind plate.
The blind plate is not used.
12
050106.01
ATANK...
Connection kit for fresh water tanks