Operating Instructions - Skil CR540601 Manuel D'utilisation

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a
short circuit.
WARNING
parts could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
parts.
This cordless circular saw must be used only with the battery packs and charger listed
below:
2Ah
SKIL BY519701
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
To Attach/Detach Battery Pack
(Fig . 2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button, located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
NOTICE: When placing the battery pack on the tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool and that the latches snap into place properly.
Improper attachment of the battery pack can cause damage to internal components.
WARNING
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or modification
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
Battery Pack
4Ah
SKIL BY519601
Battery tools are always in operating condition. Therefore, remove the
battery when the tool is not in use or when carrying it at your side.
5Ah
SKIL BY519603
Fig. 2
Attach
Detach
Charger
SKIL SC535801
Battery-
Release Button
13