Installation Guide
This Installation Guide provides instructions for installing AXIS Q1614-E Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com
Installation Steps
1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 17.
4. Install the hardware. See page 20.
5. Access the product. See page 25.
6. Set the focus. See page 24.
Package Contents
•
AXIS Q1614–E Network Camera
•
4–pin I/O connector block for connecting external devices
•
Wall bracket
•
Torx screwdriver T20
•
Printed materials
-
Installation Guide (this document)
-
Extra serial number label (2x)
-
AVHS Authentication key
AXIS Q1614-E Network Camera
9