Installation Steps; Package Contents - Axis Q1602 Guide D'installation

AXIS Q1602/Q1604 Network Camera Installation Guide
AXIS Q1602/Q1604 Network Camera
This guide provides instructions for installing an AXIS Q1602/Q1604 Network Camera on your
network. For all other aspects of using the product, please see the User's Manual, available on the
CD included in this package, or from www.axis.com

Installation steps

Follow these steps to install the network camera on your local network (LAN):
1. Check the package contents against the list below.
2. Install the hardware. See page 7.
3. Assign an IP address. See page 8.
4. Set the password. See page 11.
5. Adjust zoom and focus. See page 13.

Package contents

Item
Network camera
Power block connector
Terminal block connector
Camera stand
CD
Printed Materials
Optional accessories
Installation Guide
Models/variants/notes
AXIS Q1602, AXIS Q1604
2-pin connector block for power input
4-pin connector block for connecting external devices to the I/O terminal
connector
AXIS Network Video Product CD, including product documentation, installation
tools and other software
AXIS Q1602/Q1604 Installation Guide (this document)
Axis Warranty Document
Extra serial number label
AVHS Authentication key
See www.axis.com for information on power accessories and outdoor housings
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5