Yakima MultiMount Instructions De Montage page 2

Attach SnapArounds (or MightyMounts).
FOR YAKIMA
ROUND BARS:
Insert bolt through
MultiMount.
1032731C-2/9
FOR SQUARE
BARS:
If you have SQUARE BARS,
loosen the tabs by bending
them repeatedly.
Remove the tabs with
scissors or pliers.
Re-insert pad. Pad may be left out for
larger loads.
FOR OTHER
BARS:
MightyMount attachments
purchased separately. (Your
bars may not be shaped as
sampled.)
Turn the MultiMount over to
ensure that hooked edge of
pad is caught on the bottom
ridge of MultiMount.
Remove pad insert from
MultiMount.
Press the pad
into place.