Napoleon Prestige Pro 500 Mode D'emploi page 9

Illumination Instructions
Motion sensor and Knobs and Oven Lights
Illumination modes
Default mode
• Knob light mode Blue
• Brightness on high
• Motion Sensor is On
Select Knob light mode by holding down the
Release it on the desired mode.
Go back to Default mode: by holding down the
Selecting a color
•
•
•
N415-0541 APR 11.19
N415-0541 APR 11.19.indd 9
Turn the Power Switch ON located on the control box.
The control box should be to the left side of the inside of your cabinet, where the grill
head has been mounted on.
(See control box installation section in this manual for further reference).
A red and a blue LED light will turn on. Illumination settings
are in Default mode.
Brightness: Press the
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Motion Sensor
• The knob and logo lights will remain ON as long as motion is detected
within 1 meter of your grill. They will turn off after 15 minutes of inactivity.
• While the motion sensor is ON (as indicated by the blue LED), you can turn
the oven lights on and off with the
• Press the button in the box to turn the sensor OFF.
• Now all your lights are controlled with the
• The oven lights will turn off after two hours.
If the motion sensor is OFF, the knob and logo lights will also
shut off after two hours.
Knob lights modes
• Blue
• White
• Green - color spectrum mode
When you have the knobs on the Color spectrum mode the knobs and the logo will slowly cycle
through the color spectrum, starting at green.
Quickly Press Twice to stop the spectrum at any color you choose
Press twice again to let it continue changing colors.
button to change brightness
switch.
switch.
Brightness can be adjusted in these modes only
switch to toggle from blue to white to green.
button for 2 seconds.
9
EN
www.napoleon.com
4/11/2019 4:27:13 PM