Krups FME1 Mode D'emploi page 9

• The display (q) will show the time and a "
• Press the h/min button to cancel the programming. This will shut off the Auto On.
Changing the Programming
• Press the prog button (o) briefl y : the current clock program setting will blink.
• Now proceed as above.
Setting Auto Off (units with timer only)
On models with a glass carafe, the auto off can be set to shut the coffee machine off from 1
- 5 hours after the brew cycle is complete. The factory setting is 2 hours. On models with a
thermal carafe, the coffee machine shuts off after 20 minutes.
Note : On models without a timer the coffee machine must be turned off manually. It
will not automatically shut off.
• Press the prog button (o), immediately followed by the h/min button (n).
• The display will show the time setting.
• Press the h/min button in steps to set the auto off time.
• Press the prog button to confi rm the setting.
Setting Audible signal
This function gives an audible signal when the coffee is ready. The factory setting is "On".
• The display (q) will show "
• To turn off the audible signal :
• Press prog button then the 1 - 3 cup button (p).
• The display will show "YES": indicating the audible signal is on.
• To turn the audible signal off:
• Press the 1-3 cup button again.
• The display will show "NO": the audible signal is off.
• Press prog button to confi rm.
1 - 3 Cup Flavor Setting
This setting extracts the full fl avor of the coffee when making small quantities.
• Press the 1-3 cup button (p).
• The display will show "
Note: this function cannot be changed once the brew cycle has started.
Empty Water Reservoir
This feature automatically shuts off the coffee machine when the water reservoir has not
been fi lled.
• The display will show: "
• Wait for the coffee maker to cool down (about 10 minutes) before fi lling the reservoir (a)
with water.
• Press the O/I button to cancel the icon.
• Press the O/I button again to start your coffee machine.
10
".
" with the current time.
" with the current time.
".