gdw 1335 Instructions De Montage page 5

Chrysler Cherokee
2002 - ....
Ref. 1335
Fitting instructions
1) Permanently remove the towing ring on the left side of the vehicle.
2) Place the mounting pieces (g) and (h) with the points (A) on the provided and liberated drillings in the
underside of the chassis beam. Insert the bolts and the washers but do not tighten.
Position the tow bar between the mounting pieces (g) and (h) so that the points (B) and (B') of the tow bar
3)
are matching with those of the mounting pieces. Insert here the necessary bolts, washers and nuts and
tighten everything firmly.
4) Assemble (*) and tighten firmly.
Composition
1 tow bar reference 1335
1 ball T44L015
2 bolts M12x75
2 security nuts M12
1 security shackle (800053)
4 bolts M14x35
4 security washers M14
2 nuts M14
6 bolts M12x35
6 security washers M12
6 washers Ø24x13x2,5mm
1 mounting piece (g)
1 mounting piece (h)
All bolts and nuts: quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(B-B')
(B-B')
(B')
(A)
(A)
(A)
(A-B-B')
(A-B-B')