Volume Measurement - METRICA 61130 Mode D'emploi

VOLUME MEASUREMENT

Press button twice to enter volume measurement mode.
A is shown on the top of screen.
Please follow the below instruction for volume measuring:
- Press for length
- Press again for width.
- Press again for height
The device calculates and shows the result in the major di-
splay area.
- Press to clear off the result and to measure again if
necessary.
PYTHAGOREAN MEASUREMENT
There are four pre-set Pythagoras modes to obtain unilateral di-
stances of a triangle. This is very useful in case that the user has
to make indirect measurements in difficult circumstances. Press
button select the mode:
1° mode: Calculate the second leg of a right triangle by measu-
ring the hypotenuse and the first leg
- Press to enter Pythagoras mode, the hypotenuse of
the triangle is blinking.
- Press , measure the length of hypotenuse (a)
- Press , measure the length of one leg (b)
The device calculates the length of the other leg "X"
2° mode: Calculate the hypotenuse of a right triangle by measu-
ring the length of two legs
- Press twice; one leg of the triangle
- Press , measure the length of one leg (a).
- Press , measure the length of another leg (b).
The device calculates the length of hypotenuse "X".
is blinking.
a
15