Technical Specifications - Flex XFE 15 18.0-EC Notice D'utilisation

Instruction manual
Your risk from these exposures varies,
depending upon how often you do this type of
work. To reduce your exposure to these
chemicals:
– Work in a well-ventilated area.
– Work with approved safety equipment,
such as dust masks that are specially
designed to filter out microscopic particles.
– Avoid prolonged contact with dust from
power sanding, sawing, grinding, drilling,
and other construction activities. Wear
protective clothing and wash exposed
areas with soap and water. Allowing dust
to get into your mouth or eyes or to lie on
the skin may promote absorption of
harmful chemicals.
SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE
TO OTHER USERS AND OWNERS OF THIS TOOL!

Technical specifications

Machine type
Tool holder
Tool Ø max.
Orbit
Orbit rate
Weight according to "EPTA
Procedure 01/2003"
(without battery)
8
5. Definitions for symbols used on
V
r.p.m.
XFE 15 18.0-EC
Velcro Ø 125 (5) /
mm (in)
mm (in)
mm (in)
r.p.m. 4,600-7,600
kg (lbs)
XFE 15 18.0-EC / XCE 8 18.0-EC
this tool
volts
Rotation rate
Before switching on the power
tool, read the operating manual!
Wear eye protection!
Orbital polisher
150 (6)
160 (6.5)
15 (0.59)
2.1 (4.63)
XCE 8 18.0-EC
Velcro Ø 125 (5)
8 (0.32)
280-430
2.15 (4.74)