Technical Specifications; Instructions For Use; Dust Extractor - Flex OSE 80–2 Notice D'instructions

Technical specifications

Machine type
Voltage
Power input
Oscillating circuit diameter
Idling speed
No-load number of oscillations
Shape of the sanding plate
Size of the sanding plate
Weight (without power cord)
Protection class

Instructions for use

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Before switching on the power tool
Unpack the electric power tool and check

that no parts are missing or damaged.
Attaching/changing the sanding
sheet
The sanding plate has Velcro fasteners
and is therefore designed exclusively
for use with Velcro sanding sheet.
Pull out the mains plug.

Remove used sanding sheet (1.).

14
OSE 80-2
V/Hz
W
mm
-1
min
-1
min
Rectangular
mm 80x130
kg 1.25




Dust extractor

Use the electric power tool only with
an extractor. This will prevent high dust
loads in the working air and coarse debris
at the workplace.
The grinding dust is extracted directly from
the point of abrasion through the extraction
channels in the sanding plate.
The electric power tool can be used with
the integrated extractor or with a connected
extraction system.
OSE 80-2 / ODE 100-2 / ORE 125-2
ODE 100–2
Random-orbit sander
230/50
200
2
8000–13000
16000–26000
Triangular
100x145
1.20
II /
Remove any coarse debris from
the sanding plate.
Attach new sanding sheet (2.).
Align the holes in the sanding sheet
with the holes in the sanding plate.
Attach the sanding sheet by gently
pressing it against the Velcro fasteners
on the sanding plate.
ORE 125-2
Round
Ø 125
1.20