Maintenance And Inspection; Safety Measures; Maintenance And Inspection Table - CEMO KS-Mobil Easy K10C Liegend Mode D'emploi

6. Maintenance and inspection

6.1 Safety measures

i
Important!
The operator must provide any
protective clothing that may be required.
Maintenance may only be carried out by
instructed personnel.
In areas where there is an explosion risk,
work on the openings must only be carried out
with the approved (low-sparking) tool.

6.2 Maintenance and inspection table

Interval
As required
Monthly
Monthly
Monthly
Annually
Annually, or more
frequently if needed
Tyre pressure of the transport wheels: 2 bar.
Regular maintenance of the hand pump is
not necessary.
The filter is located between the hose sleeve
and ball valve.
To clean the filter, close the ball valve and
unscrew and remove the hose sleeve.
Assembly
Outside of filling station
Container
Piping system
Transport wheels
Filter
KITO flame arrester
®
elements
Action
Remove any dirt
Visual check for damage
Check hoses for cracks and porosity,
check fittings for leaks (replace defective parts)
Check air pressure (2 bar)
Clean
Blow out the elements with compressed air.
Hose sleeve
Seal
Filter
Ball valve
GB
21