Siemens KG28FM50/01 Notice D'utilisation page 36

PROGRAM EDIT
You can use this submenu to edit the
program allocation using Swap, Insert,
Copy and Delete.
SWAP: How to swap program
positions:
S Press the Y or B button to select
the program you wish to swap.
S Press the Program button (red). The
finger symbol flashes.
S Press the Y or B button to select
the desired program position.
S Press ENTER.
INSERT: How to insert a program:
S Press the Y or B button to select
the program you wish to move.
S Press the Intro button (green). The
finger symbol flashes.
S Press the Y or B button to select
the desired program position.
S Press ENTER.
36
COPY: How to copy a program:
S Press the Y or B buttons to select
the program you wish to copy.
S Press the Repeat button (yellow).
The finger symbol flashes.
S Press the Y or B button to select
the desired program position.
S Press ENTER.
DELETE: How to delete a program:
S Press the Y or B buttons to select
the program you wish to delete.
S Press the A−B button (blue).
COUNTRY
This submenu is described in the
section "Basic settings − Selecting the
country".
AUTO SEARCH
This submenu is described in the
section "Basic settings − Automatic
Channel Scan and Channel Setting".
TOOL
LANGUAGE
Select the desired language. The
following five languages are available:
ENGLISH, DEUTSCH, ESPAÑOL,
FRANCAIS, PORTUGUES, ITALIANO.
BLUE SCREEN
You can use this function to switch the
blue screen on and off. If this function
is activated, the screen background
turns blue when the signal is weak or
absent.
NOISE REDUCE
If the received signal is weak, you can
use this function to reduce video
disturbance in the following stages:
OFF " LOW " MID " HIGH.
INPUT SOURCE
You can use this source to select the
available input source in the following
sequence:
TV " USB " AV1 " DTV.
ASPECT RATIO
You can use this function to select two
screen formats (16:9 or 4:3).
RESET
This function is used to restore the
settings to the factory settings.
S Press the " button to start the
function.