Baninni VIGO Mode D'emploi page 11

2. Footrest adjustment
2. Footrest adjustment function:
function: As shown in Figure, press
As shown in Figure, press button
button A & B at the same time, then
A&B at the same time, then
the footrest can be asjustable
footrest can be adjustable.
4. As shown in Figure, push the wheel
4. As shown in Figure, push the
axle inward at J to the bottom, then
wheel axle inward at J to the
the installation is completed. During
bottom, then the installation is
the disassembly, the plastic sheet
completed. During the disassem-
at K and the wheel axle J should be
bly, the plastic sheet at K and the
pulled outward at the same time to
wheel axle J should be pulled-
complete the disassembly
outward at the same time to
complete the disassembly.
Unfold and install
button
3. As shown in Figure, please insert
3. As shown in Figure, please
the front wheel assembly into the
insert the front wheel assembly
front wheel assembly into the front
into the front seat hole until you
seat hole until you hear the "click"
hear the "click"sound and show
sound and show it opens. Disassem-
it opens.
ble press the button and the quick
Disassemble press the button
release wheels can be pulled out.
and the quick release wheels
can be pulled out.
5. As shown in Figure, the brake can
5. As shown in Figure, the brake
be braked by pressing the pedal ac-
can be braked by pressing the
cording to the direction of M. Lift the
pedal according to the direction
pedal according to the direction of N,
of M. Lift the pedal according to
then the brake can be released.
the direction of N, then the brake
can be released.
ENG
C
11