Binzel Abicor ABITIG Little Mode D'emploi page 27

®
ABITIG Little
Sharpening the tungsten electrode
Sharpening the tungsten electrode depends on wear and must therefore be carried out when
required.
Fig. 4
To sharpen the tungsten electrode, use a sharpening device with a diamond wheel. In doing so,
observe the following:
• The point is sharpened longitudinally through the centre axis.
• Automatic regulation of the tungsten electrode drive by gravity.
• Can be set for all electrode diameters.
• Continuous adjustment of the angle.
9 Disposal
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards and guidelines.
BAL.0186 • 2019-06-19
Sharpening the tungsten electrode
9 Disposal
EN - 13