Product Description; Technical Data - Binzel Abicor ABITIG Little Mode D'emploi

®
ABITIG Little

3 Product description

WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.

3.1 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1
Type of voltage
DC polarity of the electrodes
Type of use
Voltage rating
Max. arc ignition and stabilization voltage
Breakdown voltage 50 Hz
Protection type of the machine-side connections
(EN 60 529)
Shielding gas (DIN EN ISO 14175)
Electrode
Tab. 2
Switching voltage of trigger
Switching current of trigger
Switching power of trigger
Tab. 3
BAL.0186 • 2019-06-19
Ambient conditions during operation
General torch data (EN 60 974-7)
Electrical control devices
3 Product description
- 10 °C to + 40 °C
- 10 °C to + 55°C
up to 90 % at 20 °C
DC or AC
Usually negative
manual
113 V peak value
8 kV
IP3X
Argon
Tungsten electrodes suitable
for TIG use, preferably
low-radiation
0.02 - 42 V (DC and AC)
0.01 - 100 mA
max. 1 W (resistive load)
EN - 5